Insulation
Kaiflex RT-ST consists of high density, compressions-resistant, PIR foam sections combined with water vapour resistant Kaiflex ST insulation and a protective outer shell covering. Load bearing pipe clamps that would tear or compress standard insulation tubes can be applied directly around Kaiflex RT-ST sections.
- Prevents condensation and corrosion
- Closed cell structure with built-in water vapour barrier
- Ease of application reduces cost and time of installation
- Inherent resistance to microbial growth
- Standard 2m lengths
Trace Heating
We offer a micro self-regulating heating cable from Solco.
Features:
- Small and highly flexible so can be installed between pipes and insulation
- No overheating or burn even when overlapping each other
- Independent heat output control along the length
- Soft switching for energy saving and longer service life
- Self-regulating thermal performance in response to temperature
- Cut to length to suit requirements and installation conditions
Use:
- External trace heating of chemical pipeline and hoses
- Temperature maintenance in the chemical dosing market
- Frost protection and temperature maintenance
- Moisture-proof applications
- Use in hazardous locations
Specification:
- Temperature maintained up to 65°C (power on)
- Maximum intermittant exposure temperature 85°C (power off)
- Power supply 24V – 240V AC
- Outer jacket – FR polyolefin or fluoropolymer
- Heating cable dimension approx. 11.6mm x 5.6mm
- Bus wire – 20AWG Nickel plated copper
- Installation temperature min. -50°C
- Nominal power output 15 watt/m@10°C